Husqvarna K770 Rent or Buy? A Complete Guide for Contractors
By Avanza Equipment Team | Houston Equipment Specialists | May 2026
If you are trying to decide on the Husqvarna K770 rent or buy, you are not alone. It is one of the most common questions contractors ask before a concrete cutting job. The K770 is one of the most capable 14-inch gas power cutters on the market but whether it makes financial sense to own one depends entirely on how often you use it and what jobs you are running. This guide breaks down the real numbers, walks through a real demolition job example, and covers the Husqvarna K770 rental cost vs purchase price so you can make the right call for your business.
What Is the Husqvarna K770?
The Husqvarna K770 is a professional-grade 14-inch gas-powered concrete saw designed for cutting concrete, asphalt, brick, and masonry on job sites. It runs on a 73.5cc X-Torq engine that delivers high power with lower fuel consumption compared to older models. The K770 is built for demanding site conditions and handles deep cuts, works in tight spaces, and accepts both diamond blades and abrasive wheels.
At Avanza Equipment we carry the K770 both for sale and as a concrete saw for demolition rental. That puts us in a position to give you an honest comparison because both paths lead to Avanza and the only question is which one makes more sense for your situation.
Husqvarna K770 Rent or Buy — The Real Question
The rent or buy decision comes down to three factors: how often you need it, how much each job pays, and whether the machine sits idle between projects. A K770 that gets used twice a month earns its purchase price back in about 12 months. A K770 that gets used twice a year is an expensive piece of storage equipment.
Most contractors fall into one of two clear categories. If you are a concrete contractor or a demolition crew running 10 or more cutting jobs per year, ownership starts to make financial sense. If you are a general contractor, landscaper, or homeowner who needs a concrete saw for one or two specific jobs per year, renting is the smarter move every time.
The other factor nobody talks about is maintenance. Owning a K770 means owning the blade costs, air filter replacements, spark plug changes, and periodic carburetor servicing. When you rent from Avanza, the machine arrives maintained and blade-ready. You pay for the use, not the upkeep.
Husqvarna K770 Rental Cost vs Purchase Price
Here is a direct comparison of the Husqvarna K770 rental cost vs purchase price based on current market data as of May 2026:
| Cost Factor | Renting | Buying |
|---|---|---|
| Upfront Cost | $0 | $1,249 to $1,299 |
| Daily Rate | Contact Avanza for pricing | $0 after purchase |
| Weekly Rate | Contact Avanza for pricing | $0 after purchase |
| Diamond Blade Cost | Not Included | $40 to $200 per blade |
| Annual Maintenance | Included | $100 to $300 per year |
| Storage Required | No | Yes |
| Break-Even Point | N/A | Approx. 12 months at 10 or more jobs per year |
Purchase price data sourced from current market listings including MachineryTrader and eBay as of May 2026. For Avanza rental pricing contact our team at (346) 531-0470.
Real Example: Using the K770 as a Concrete Saw for Demolition
Here is a real-world example of how the rent vs buy decision plays out on a concrete saw for demolition job.
A Houston general contractor is hired to remove a 400 square foot concrete slab in a backyard to install a drainage system. The slab is 4 inches thick. The job is scheduled for one day and the contractor does not specialize in concrete cutting — this is a one-off scope added to a larger landscaping project.
The Job Breakdown
To section the slab for removal the contractor needs to make 8 to 10 straight cuts across the surface, dividing it into manageable sections that can be broken up and hauled away. Each cut runs approximately 15 to 20 feet. The K770 handles all of these cuts in under two hours using a diamond segmented blade on dry concrete.
Why Renting Makes Sense Here
This contractor uses a concrete saw two or three times per year maximum. Buying a K770 at $1,249 to $1,299 for a job that takes two hours does not make financial sense. Renting from Avanza for one day covers the full scope of work at a fraction of the purchase price, the machine arrives ready to use, and the contractor returns it when the job is done with zero storage or maintenance responsibility.
When the Same Contractor Should Buy
If that same contractor starts picking up dedicated demolition and concrete cutting work consistently, running 10 or more cutting days per year, the math shifts. At that point the purchase price is recovered within 12 months and every job after that runs at zero equipment cost. The K770 also becomes available on the contractor’s schedule without needing to call ahead for availability.
Who Should Rent and Who Should Buy
| Rent the K770 If… | Buy the K770 If… |
|---|---|
| You need it for one or two jobs per year | You run 10 or more concrete cutting jobs per year |
| You are a general contractor or homeowner | You are a dedicated concrete or demolition contractor |
| You do not want to manage blade and maintenance costs | You have storage capacity and handle your own maintenance |
| You want the machine same day without upfront cost | You want the machine available on your schedule at all times |
| Your jobs vary in equipment requirements | Concrete cutting is your primary service |
For jobs that require both cutting and breaking, our hydraulic breaker rentals pair well with the K770 on larger demolition jobs. You can also browse our full equipment comparison guides for similar rent vs buy decisions across other machines in our fleet.
If you are still working through the numbers, our rental tips guides cover the full cost breakdown of renting vs owning across different equipment types.
Get the K770 on Your Job Site
Avanza Equipment carries the Husqvarna K770 for both rental and purchase. Same-day availability in Houston. Text Eduardo at (346) 531-0470 and get it delivered to your job site today.
Rent the K770 from Avanza | Buy the K770 from Avanza
Frequently Asked Questions
How much does it cost to rent a Husqvarna K770?
Rental pricing for the Husqvarna K770 at Avanza Equipment varies based on rental duration and availability. Contact our team at (346) 531-0470 or visit avanzaequipment.com for current pricing. Same-day delivery available across Greater Houston.
How much does a Husqvarna K770 cost to buy?
The Husqvarna K770 purchase price ranges from $1,249 to $1,299 based on current market listings as of May 2026. Avanza Equipment carries the K770 in stock. Visit our shop or call (346) 531-0470 for current availability and pricing.
Is the K770 a good concrete saw for demolition?
Yes. The K770 cuts up to 5 inches deep which covers most residential and light commercial demolition work. It sections concrete slabs efficiently before breaking, reducing manual labor significantly. For larger demolition jobs pair it with a hydraulic breaker from Avanza’s rental fleet.
Should I rent or buy a concrete saw for a one-time job?
Rent. For a single demolition job, slab removal, or one-time concrete project, renting the K770 from Avanza is significantly more cost-effective than purchasing. You pay only for the days you use it with no maintenance costs, storage requirements, or blade expenses included.
Does Avanza Equipment deliver the K770 to my job site?
Yes. Avanza delivers directly to your job site across Greater Houston with our own crew. No third-party carriers. Text Eduardo at (346) 531-0470 for same-day or next-day delivery.
What blade does the Husqvarna K770 use for demolition concrete cutting?
For demolition work where precision matters use a diamond segmented blade rated for concrete. For rough demolition cuts where concrete will be broken up and removed, an abrasive wheel is acceptable and more cost-effective. Avanza stocks Husqvarna diamond blades compatible with the K770 in our Houston location.
Written by the Avanza Equipment Team | Houston-based equipment rental specialists serving contractors and builders across Greater Houston since 2009.